UofM Research Equipment

Medium Direct Metal Laser Sintering System

EOS

EOS M290

1

Medium Direct Metal Laser Sintering System (EOS M290) that uses a 400 Watt Yb (Ytterbium) fiber laser with a wavelength of 1060-1100 nm and using an F-Theta focusing lens, the focal length of the F-Theta lens is 410 mm. The machine also contains self-cleaning filters. The minimum exposure area is 250 mm x 250 mm with an exposure speed up to 7000 mm/s and a scanner position repeatability of < 11 ? rad. The z-axis repeatability of positioning is ? ± 0.005 mm. EOS M290 uses am high-speed steel and ceramic blades with travel speed 40-500 mm/s. In addition, the integrated platform has a heating module capable of operating between approx. 40 to 200° C. The EOS M290 machine license includes a full academic license with validated parameters for bulk MS, MP, Ti-6Al-4V, AlSi10Mg, IN625, IN718, HX and 316L.

Prior training and approval, may require custom software https://www.eos.info/en/additive-manufacturing/3d-printing-metal/eos-metal-systems/eos-m-290

MS, MP, Ti-6Al-4V, AlSi10Mg, IN625, IN718, HX and 316L.

0.00

0.00

0.00

Main Campus

Engineering Science Building

310A

Mechanical Engineering

Ali Fatemi

Metal Additive Manufacturing Laboratory

Ebrahim Asadi

(901) 678-3333

easadi@memphis.edu

https://www.memphis.edu/me/

Research Equipment Asset Managers

RE-000407

OPERATIONAL

Ali Fatemi

mechanical, laser, sintering